Finish motion setup

roles/fetlab/files/motion.conf

@@ -0,0 +1,14 @@
+# @enabled on
+# @show_advanced on
+# @normal_password da559fac89e576192f868ff898652ec74cb7b4d6
+# @admin_username admin
+# @admin_password da559fac89e576192f868ff898652ec74cb7b4d6
+# @normal_username user
+
+
+thread thread-1.conf
+webcontrol_html_output on
+webcontrol_port 7999
+setup_mode off
+webcontrol_parms 2
+webcontrol_localhost on

roles/fetlab/files/motioneye.conf

@@ -0,0 +1,97 @@
+
+# path to the configuration directory (must be writable by motionEye)
+conf_path /etc/motioneye
+
+# path to the directory where pid files go (must be writable by motionEye)
+run_path /var/run/motioneye
+
+# path to the directory where log files go (must be writable by motionEye)
+log_path /var/log/motioneye
+
+# default output path for media files (must be writable by motionEye)
+media_path /var/lib/motioneye
+
+# the log level (use quiet, error, warning, info or debug)
+log_level info
+
+# the IP address to listen on
+# (0.0.0.0 for all interfaces, 127.0.0.1 for localhost)
+listen 0.0.0.0
+
+# the TCP port to listen on
+port 8765
+
+# path to the motion binary to use (automatically detected if commented)
+#motion_binary /usr/bin/motion
+
+# whether motion HTTP control interface listens on
+# localhost or on all interfaces
+motion_control_localhost true
+
+# the TCP port that motion HTTP control interface listens on
+motion_control_port 7999
+
+# interval in seconds at which motionEye checks if motion is running
+motion_check_interval 10
+
+# whether to restart the motion daemon when an error occurs while communicating with it
+motion_restart_on_errors false
+
+# interval in seconds at which motionEye checks the SMB mounts
+mount_check_interval 300
+
+# interval in seconds at which the janitor is called
+# to remove old pictures and movies
+cleanup_interval 43200
+
+# timeout in seconds to wait for response from a remote motionEye server
+remote_request_timeout 10
+
+# timeout in seconds to wait for mjpg data from the motion daemon
+mjpg_client_timeout 10
+
+# timeout in seconds after which an idle mjpg client is removed
+# (set to 0 to disable)
+mjpg_client_idle_timeout 10
+
+# enable SMB shares (requires motionEye to run as root) 
+smb_shares false
+
+# the directory where the SMB mount points will be created
+smb_mount_root /media
+
+# path to the wpa_supplicant.conf file
+# (enable this to configure wifi settings from the UI)
+#wpa_supplicant_conf /etc/wpa_supplicant.conf
+
+# path to the localtime file
+# (enable this to configure the system time zone from the UI)
+#local_time_file /etc/localtime
+
+# enables shutdown and rebooting after changing system settings
+# (such as wifi settings or time zone)
+enable_reboot false
+
+# timeout in seconds to use when talking to the SMTP server
+smtp_timeout 60
+
+# timeout in seconds to wait for media files list
+list_media_timeout 120
+
+# timeout in seconds to wait for media files list, when sending emails
+list_media_timeout_email 10
+
+# timeout in seconds to wait for zip file creation
+zip_timeout 500
+
+# timeout in seconds to wait for timelapse creation
+timelapse_timeout 500
+
+# enable adding and removing cameras from UI
+add_remove_cameras true
+
+# enables HTTP basic authentication scheme (in addition to, not instead of the signature mechanism)
+http_basic_auth false
+
+# overrides the hostname (useful if motionEye runs behind a reverse proxy)
+# server_name motionEye

roles/fetlab/files/motioneye.service

@@ -0,0 +1,10 @@
+[Unit]
+Description=motionEye Server
+
+[Service]
+ExecStart=/usr/local/bin/meyectl startserver -c /etc/motioneye/motioneye.conf
+Restart=on-abort
+User=motion
+
+[Install]
+WantedBy=multi-user.target

roles/fetlab/files/thread-1.conf

@@ -0,0 +1,82 @@
+# @webcam_resolution 100
+# @upload_subfolders on
+# @upload_server 
+# @enabled on
+# @network_server 
+# @upload_username 
+# @motion_detection on
+# @upload_port 
+# @upload_location 
+# @preserve_movies 0
+# @network_username 
+# @upload_movie on
+# @id 1
+# @manual_record off
+# @upload_password 
+# @upload_method post
+# @upload_picture on
+# @working_schedule_type outside
+# @network_password 
+# @upload_service ftp
+# @name Camera1
+# @preserve_pictures 0
+# @storage_device custom-path
+# @manual_snapshots on
+# @network_share_name 
+# @upload_enabled off
+# @webcam_server_resize off
+# @working_schedule 
+
+
+ffmpeg_output_movies on
+height 576
+stream_quality 85
+threshold 12960
+quality 85
+noise_level 31
+ffmpeg_output_debug_movies off
+pre_capture 1
+noise_tune on
+smart_mask_speed 0
+stream_maxrate 5
+output_pictures on
+hue 0
+saturation 0
+stream_localhost off
+ffmpeg_variable_bitrate 75
+ffmpeg_video_codec mp4:h264_omx
+text_changes off
+movie_filename %Y-%m-%d/%H-%M-%S
+auto_brightness off
+stream_port 8081
+rotate 180
+brightness 0
+lightswitch 0
+framerate 2
+emulate_motion off
+snapshot_filename %Y-%m-%d/%H-%M-%S
+despeckle_filter 
+snapshot_interval 0
+stream_auth_method 0
+stream_motion off
+target_dir /var/lib/motioneye/Camera1
+text_double on
+post_capture 1
+stream_authentication user:
+output_debug_pictures off
+on_picture_save /usr/local/lib/python2.7/dist-packages/motioneye/scripts/relayevent.sh "/etc/motioneye/motioneye.conf" picture_save %t %f
+on_movie_end /usr/local/lib/python2.7/dist-packages/motioneye/scripts/relayevent.sh "/etc/motioneye/motioneye.conf" movie_end %t %f
+text_left Camera1
+picture_filename %Y-%m-%d/%H-%M-%S
+locate_motion_style redbox
+locate_motion_mode off
+contrast 0
+videodevice /dev/v4l/by-id/usb-1b80_USB_2861_Device-video-index0
+max_movie_time 0
+on_event_end /usr/local/lib/python2.7/dist-packages/motioneye/scripts/relayevent.sh "/etc/motioneye/motioneye.conf" stop %t
+text_right %Y-%m-%d\n%T
+on_event_start /usr/local/lib/python2.7/dist-packages/motioneye/scripts/relayevent.sh "/etc/motioneye/motioneye.conf" start %t
+event_gap 30
+minimum_motion_frames 20
+mask_file 
+width 720

roles/fetlab/handlers/main.yml

@@ -0,0 +1,11 @@
+---
+- name: restart motion
+  service: name=motion state=restarted
+
+- name: restart motioneye systemd
+  systemd: daemon_reload=yes
+  listen: restart motioneye
+
+- name: restart motioneye service
+  service: name=motioneye state=restarted
+  listen: restart motioneye

roles/fetlab/tasks/motion.yml

@@ -1,4 +1,49 @@
 ---
- - name: motion - install motion
-   package: name=motion
+- name: motion - install motion
+  package: name=motion
+
+#- name: motion - /etc/default/motion
+#  replace:
+#    path: /etc/default/motion
+#    regexp: "^start_motion_daemon=.*"
+#    replace: "start_motion_daemon=yes"
+#  notify: restart motion
+
+- name: motion - install motioneye packages
+  package: "name={{ item }}"
+  with_items:
+  - python-pip
+  - python-dev
+  - python-setuptools
+  - curl
+  - libssl-dev
+  - libcurl4-openssl-dev
+  - libjpeg-dev
+  - libz-dev
+  - ffmpeg
+  - v4l-utils
+
+- name: motion - install motioneye
+  pip: name=motioneye state=latest executable=pip
+  notify: restart motioneye
+
+- name: motion - setup storage
+  file: "path={{ item }} owner=motion group=adm mode=755 state=directory"
+  with_items:
+  - /var/lib/motioneye/
+  - /var/log/motioneye/
+  - /var/run/motioneye/
+  - /etc/motioneye/
+
+- name: motion - configure motioneye
+  copy: "src={{ item }} dest=/etc/motioneye/{{ item }} owner=motion group=adm mode=0644"
+  with_items:
+  - motion.conf
+  - motioneye.conf
+  - thread-1.conf
+  notify: restart motioneye
+
+- name: motion - copy service file
+  copy: src=motioneye.service dest=/etc/systemd/system/motioneye.service
+  notify: restart motioneye